Tag Archives: seismic safety

Advances in Seismic Technology (Part 3)

After many years of careful planning and hard work, the Hillside House has taken its place as one of the most seismically advanced houses in the country. In previous posts, I related the background and process of design. We’ve finally reached the most exciting part of the story – construction!


The first step of the installation happened “below the surface”. To transfer the loads from the steel frames to the foundation, the Structural Engineer devised a specialized steel column/baseplate to be cast into the concrete. Each post was integrated into the steel reinforcing of the basement concrete wall allowing only a ¼” tolerance from perfect placement – and there were 21 of columns to install. Fortunately, the Contractor was up to the job and handled it beautifully!

Continue reading

Advances in Seismic Technology (Part 1)

The August 24, 2014  earthquake in Napa provides us with another reminder of the challenges of living in the Bay Area – one of the most beautiful places in the country. The quake was strong, but fortunately wasn’t the “Big One”; so the damage was limited and no one was seriously injured or killed.   Safety in an earthquake, even a very large one though, doesn’t have to depend on fortune. Building science and technology available today can not only prevent death and injury, but  can also prevent destruction and minimize damage to the places where we live, work and play . One of our projects, which we call the Hillside House, is among the first residences in the country to use such technology. Let me share a little background information to help set things in context.

Modern Codes have made our buildings much safer than those of yesteryear, but the standards they set do not require the best possible analysis or technologies be used. The general goal of the Code in an earthquake is to Continue reading